Revisión de Zsh Setup

Vernon Wee Hong KOH revisó este gist 1 day ago. Ir a la revisión

7 files changed, 260 insertions, 319 deletions

README.md

			@@ -1,5 +1,6 @@
1		-	# Bash Script Installer for Zsh
2		-	The "Bash Script Installer" simplifies the setup of Zsh.
	1	+	# Zsh Setup
	2	+
	3	+	Cross-platform Zsh installers and managed dotfiles for Oh My Zsh and Starship.
3	4
4	5		## Zsh
5	6		### Ubuntu
			@@ -10,7 +11,7 @@ bash -c "$(curl -fsSL https://tinyurl.com/y6fhb594)"
10	11		```zsh
11	12		bash -c "$(curl -fsSL https://tinyurl.com/ycyct6wp)"
12	13		```
13		-	### MacOS
	14	+	### macOS
14	15		```zsh
15	16		bash -c "$(curl -fsSL https://tinyurl.com/yptybtpa)"
16	17		```
			@@ -20,7 +21,28 @@ bash -c "$(curl -fsSL https://tinyurl.com/yptybtpa)"
20	21		bash -c "$(curl -fsSL https://tinyurl.com/y8vf753j)"
21	22		```
22	23
23		-	### Shell framework and prompt
	24	+	The platform installers share `config.sh`, which owns the managed-file list and
	25	+	download logic. Both configuration menu options install the canonical `zshrc`
	26	+	file. Existing files are replaced only after a non-empty download succeeds;
	27	+	failures return a nonzero status. Updates are atomic per file, not across the
	28	+	whole configuration set.
	29	+
	30	+	When run from a checkout, installers load the adjacent `config.sh`. The
	31	+	curl-based entry points fetch it from the gist. `GIST_RAW_BASE` overrides the
	32	+	download base URL for both the helper and managed files.
	33	+
	34	+	## Repository layout
	35	+
	36	+	\| Files \| Purpose \|
	37	+	\| --- \| --- \|
	38	+	\| `zsh_ubuntu.sh`, `zsh_wsl.sh`, `zsh_macos.sh` \| Platform setup and interactive menus \|
	39	+	\| `config.sh` \| Shared configuration installer; also runnable on its own \|
	40	+	\| `zshrc`, `alias`, `func`, `pathrc`, `sourcerc`, `vimrc` \| Managed shell and editor dotfiles \|
	41	+	\| `starship.toml` \| Prompt configuration \|
	42	+	\| `ai-commit.md`, `ai-commit.txt` \| Commit agents and prompts \|
	43	+	\| `test_*.py`, `test_plan_build.zsh` \| Isolated regression tests \|
	44	+
	45	+	## Shell framework and prompt
24	46		The installers use Oh My Zsh for framework features and plugins, with the OMZ theme disabled:
25	47
26	48		```zsh
			@@ -41,11 +63,12 @@ aicommit opencode
41	63
42	64		The installers place the shared commit instructions at `~/.config/ai-commit-prompt.txt` and the required OpenCode agent at `~/.config/opencode/agents/ai-commit.md`. The agent is hidden from the interactive agent selector but remains available to `aicommit opencode`. It may inspect Git status, the cached diff, and recent history, and may execute `git commit`; all unrelated tools and shell commands are denied.
43	65
44		-	Changes affecting more than 30 staged paths automatically use per-module commits. They must produce multiple commits, rather than a single combined commit message. The count uses the full staged set before diff filtering or truncation, including lock/minified files and both paths of a rename. Exactly 30 paths retains the single-commit default. Pass `--modules` to request splitting at any size:
	66	+	Changes affecting more than 30 staged paths default to per-module commits. In an interactive terminal, the function asks whether to split; declining requests one combined commit. Without a terminal, or with `--yes`, it splits automatically. Use `--single` to explicitly request one commit, or `--modules` to split at any size; these options are mutually exclusive. The count uses the full staged set before diff filtering or truncation, including lock/minified files and both paths of a rename. Exactly 30 paths retains the single-commit default:
45	67
46	68		```zsh
47	69		aicommit --modules opencode
48	70		aicommit --modules --yes claude
	71	+	aicommit --single opencode
49	72		```
50	73
51	74		Automatic splitting uses the same planning and confirmation flow as `--modules`; `--yes` skips confirmation in either case (for example, `aicommit --yes opencode`). Plans that collapse a change above the threshold into one group are rejected before committing, with the index untouched. Grouping follows cohesive modules or submodules; 30 is the automatic-splitting threshold, not a hard size limit per planned module.
			@@ -75,3 +98,18 @@ The canonical executable defines the current command behavior and options. Each
75	98		The launcher defaults to `https://opengist.resetrix.work/weehong/plan-build/raw/HEAD` and `${XDG_CACHE_HOME:-$HOME/.cache}/plan-build`. Override these with `PLAN_BUILD_BASE_URL` and `PLAN_BUILD_CACHE_DIR`. Installed skill paths remain fixed at `~/.claude/skills`; cached invocations receive immutable release paths through environment variables. The downloaded script is remote executable code: syntax validation catches malformed Zsh but is not a security sandbox, so only point `PLAN_BUILD_BASE_URL` at a source you trust. Remote code is executed in a child Zsh process and is never sourced into the caller shell.
76	99
77	100		Invoking `plan_build` once installs or repairs both skill links. To install standalone files without the cached launcher, follow the installation instructions in the canonical gist instead.
	101	+
	102	+	## Development checks
	103	+
	104	+	Run from the repository root with Bash, Zsh, Python 3, Git, and curl installed:
	105	+
	106	+	```sh
	107	+	for file in *.sh; do bash -n "$file" \|\| exit; done
	108	+	for file in alias func pathrc sourcerc zshrc; do zsh -n "$file" \|\| exit; done
	109	+	PYTHONDONTWRITEBYTECODE=1 python3 -m unittest discover -p 'test_*.py'
	110	+	zsh -f test_plan_build.zsh
	111	+	git diff --check
	112	+	```
	113	+
	114	+	Tests use temporary homes and local fixtures rather than installing packages or
	115	+	invoking AI services.

config.sh

			@@ -1,8 +1,7 @@
1	1		#!/bin/bash
2		-	set -euo pipefail
	2	+	# Shared configuration installer; safe to source from the platform installers.
3	3
4		-	# Configuration
5		-	GIST_RAW_BASE="https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD"
	4	+	GIST_RAW_BASE="${GIST_RAW_BASE:-https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD}"
6	5		CONFIG_FILES=(
7	6		".alias"
8	7		".func"
			@@ -17,37 +16,44 @@ CONFIG_FILES=(
17	16		".config/opencode/agents/ai-commit-plan.md"
18	17		)
19	18
20		-	echo "Starting configuration download..."
21		-	download_failed=0
	19	+	download_config() (
	20	+	# A subshell keeps temporary-file traps out of the caller's shell.
	21	+	local file="$1" remote_name target tmp
	22	+	remote_name="${file##*/}"
	23	+	remote_name="${remote_name#.}"
	24	+	target="$HOME/$file"
	25	+	mkdir -p "$(dirname "$target")" \|\| return 1
	26	+	tmp="$(mktemp "${target}.tmp.XXXXXX")" \|\| return 1
	27	+	trap 'rm -f "$tmp"' EXIT
	28	+	trap 'exit 1' HUP INT TERM
22	29
23		-	for f in "${CONFIG_FILES[@]}"; do
24		-	# Remove the leading dot for the URL path
25		-	remote_name="${f#.}"
26		-	[[ "$f" == ".config/starship.toml" ]] && remote_name="starship.toml"
27		-	[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_name="ai-commit-prompt.txt"
28		-	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_name="ai-commit-split-prompt.txt"
29		-	[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_name="ai-commit.md"
30		-	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_name="ai-commit-plan.md"
31		-	url="$GIST_RAW_BASE/$remote_name"
32		-	target="$HOME/$f"
33		-	tmp="${target}.tmp.$$"
34		-
35		-	echo "Downloading $f..."
36		-	mkdir -p "$(dirname "$target")"
37		-
38		-	# Use -f to fail silently on server errors, -s for silent, -L to follow redirects
39		-	if curl -fsSL "$url" -o "$tmp" && mv "$tmp" "$target"; then
40		-	echo "Successfully updated $target"
	30	+	printf 'Downloading %s...\n' "$file"
	31	+	if curl -fsSL "${GIST_RAW_BASE%/}/$remote_name" -o "$tmp" &&
	32	+	[[ -s "$tmp" ]] && mv "$tmp" "$target"; then
	33	+	printf 'Successfully updated %s\n' "$target"
41	34		else
42		-	rm -f "$tmp"
43		-	echo "Error: Failed to download $f from $url" >&2
44		-	download_failed=1
	35	+	printf 'Error: Failed to install %s\n' "$file" >&2
	36	+	return 1
45	37		fi
46		-	done
	38	+	)
47	39
48		-	if [ "$download_failed" -ne 0 ]; then
49		-	echo "Configuration download completed with errors." >&2
50		-	exit 1
51		-	fi
	40	+	download_configs() {
	41	+	local file failed=0
	42	+	for file in "${CONFIG_FILES[@]}"; do
	43	+	download_config "$file" \|\| failed=1
	44	+	done
	45	+	if [[ "$failed" -ne 0 ]]; then
	46	+	printf 'Configuration download completed with errors.\n' >&2
	47	+	return 1
	48	+	fi
	49	+	printf 'Done! All configuration files have been replaced.\n'
	50	+	}
	51	+
	52	+	configure_zshrc() {
	53	+	download_config .zshrc
	54	+	}
52	55
53		-	echo "Done! All configuration files have been replaced."
	56	+	if [[ "${BASH_SOURCE[0]:-$0}" == "$0" ]]; then
	57	+	set -euo pipefail
	58	+	download_configs
	59	+	fi

test_aicommit.py

			@@ -68,7 +68,19 @@ class AicommitTests(unittest.TestCase):
68	68		result = self.shell(ROUTE, "--yes", engine)
69	69		self.assertEqual(result.returncode, 7, result.stderr)
70	70		self.assertEqual(result.stdout.strip(), f"MODULES {engine} 1")
71		-	self.assertIn("exceed 30", result.stderr)
	71	+
	72	+	def test_explicit_single_above_threshold(self):
	73	+	self.stage(31)
	74	+	result = self.shell(ROUTE, "--single", "opencode")
	75	+	self.assertEqual(result.returncode, 0, result.stderr)
	76	+	self.assertEqual(result.stdout.strip(), "ENGINE opencode commit")
	77	+
	78	+	def test_conflicting_modes_never_call_engine(self):
	79	+	self.stage(1)
	80	+	result = self.shell(ROUTE, "--single", "--modules")
	81	+	self.assertNotEqual(result.returncode, 0)
	82	+	self.assertNotIn("ENGINE", result.stdout)
	83	+	self.assertNotIn("MODULES", result.stdout)
72	84
73	85		def test_explicit_modules_below_threshold(self):
74	86		self.stage(1)

test_config.py(archivo creado)

		@@ -0,0 +1,103 @@
1	+	#!/usr/bin/env python3
2	+	"""Test configuration downloads in a temporary home without network access."""
3	+
4	+	import os
5	+	from pathlib import Path
6	+	import subprocess
7	+	import tempfile
8	+	import unittest
9	+
10	+
11	+	ROOT = Path(__file__).resolve().parent
12	+	TARGETS = (
13	+	".alias", ".func", ".pathrc", ".sourcerc", ".vimrc", ".zshrc",
14	+	".config/starship.toml", ".config/ai-commit-prompt.txt",
15	+	".config/ai-commit-split-prompt.txt",
16	+	".config/opencode/agents/ai-commit.md",
17	+	".config/opencode/agents/ai-commit-plan.md",
18	+	)
19	+
20	+
21	+	class ConfigTests(unittest.TestCase):
22	+	def setUp(self):
23	+	temp = tempfile.TemporaryDirectory(prefix="config-test-")
24	+	self.addCleanup(temp.cleanup)
25	+	self.root = Path(temp.name)
26	+	self.home = self.root / "home"
27	+	self.home.mkdir()
28	+	self.env = {
29	+	**os.environ, "HOME": str(self.home),
30	+	"GIST_RAW_BASE": ROOT.as_uri() + "/",
31	+	"TMPDIR": str(self.root),
32	+	}
33	+
34	+	def run_bash(self, *args):
35	+	return subprocess.run(
36	+	["bash", *args], env=self.env, capture_output=True, text=True,
37	+	)
38	+
39	+	def assert_installed(self):
40	+	for target in TARGETS:
41	+	source = ROOT / Path(target).name.lstrip(".")
42	+	self.assertEqual((self.home / target).read_bytes(), source.read_bytes())
43	+	self.assertEqual(list(self.home.rglob(".tmp.")), [])
44	+
45	+	def test_standalone_and_inline_entry_points(self):
46	+	for args in ((str(ROOT / "config.sh"),), ("-c", (ROOT / "config.sh").read_text())):
47	+	with self.subTest(args=args[:1]):
48	+	result = self.run_bash(*args)
49	+	self.assertEqual(result.returncode, 0, result.stderr)
50	+	self.assert_installed()
51	+
52	+	def test_source_has_no_download_side_effects(self):
53	+	result = self.run_bash("-c", 'source "$1"', "test", str(ROOT / "config.sh"))
54	+	self.assertEqual(result.returncode, 0, result.stderr)
55	+	self.assertEqual(list(self.home.iterdir()), [])
56	+
57	+	def test_failed_and_empty_downloads_preserve_existing_files(self):
58	+	remote = self.root / "remote"
59	+	remote.mkdir()
60	+	self.env["GIST_RAW_BASE"] = remote.as_uri()
61	+	for target in TARGETS:
62	+	path = self.home / target
63	+	path.parent.mkdir(parents=True, exist_ok=True)
64	+	path.write_text("existing config\n")
65	+	# One empty response, one successful response, all others missing.
66	+	(remote / "zshrc").touch()
67	+	(remote / "alias").write_text("new aliases\n")
68	+	result = self.run_bash(str(ROOT / "config.sh"))
69	+	self.assertNotEqual(result.returncode, 0)
70	+	self.assertNotIn("Done!", result.stdout)
71	+	for target in TARGETS:
72	+	expected = "new aliases\n" if target == ".alias" else "existing config\n"
73	+	self.assertEqual((self.home / target).read_text(), expected)
74	+	self.assertEqual(list(self.home.rglob(".tmp.")), [])
75	+
76	+	def test_platform_loaders_local_and_remote(self):
77	+	for name in ("zsh_ubuntu.sh", "zsh_wsl.sh", "zsh_macos.sh"):
78	+	for local in (True, False):
79	+	with self.subTest(platform=name, local=local):
80	+	script = ROOT / name
81	+	if not local:
82	+	# An isolated script has no adjacent config.sh, just like
83	+	# the curl entry point, and must fetch the shared code.
84	+	script = self.root / name
85	+	script.write_text((ROOT / name).read_text())
86	+	result = self.run_bash(
87	+	"-c", 'source "$1"; load_config_installer; download_configs',
88	+	"test", str(script),
89	+	)
90	+	self.assertEqual(result.returncode, 0, result.stderr)
91	+	self.assert_installed()
92	+
93	+	def test_zshrc_only_uses_canonical_file(self):
94	+	result = self.run_bash(
95	+	"-c", 'source "$1"; configure_zshrc', "test", str(ROOT / "config.sh"),
96	+	)
97	+	self.assertEqual(result.returncode, 0, result.stderr)
98	+	self.assertEqual((self.home / ".zshrc").read_bytes(), (ROOT / "zshrc").read_bytes())
99	+	self.assertEqual(list(self.home.iterdir()), [self.home / ".zshrc"])
100	+
101	+
102	+	if __name__ == "__main__":
103	+	unittest.main()

zsh_macos.sh

			@@ -18,21 +18,7 @@ err() { echo -e "${RED}[ERROR]${NC} $*" >&2; }
18	18		# =============================
19	19		# CONFIG
20	20		# =============================
21		-	GIST_RAW_BASE="https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD"
22		-
23		-	CONFIG_FILES=(
24		-	".alias"
25		-	".func"
26		-	".pathrc"
27		-	".sourcerc"
28		-	".vimrc"
29		-	".zshrc"
30		-	".config/starship.toml"
31		-	".config/ai-commit-prompt.txt"
32		-	".config/ai-commit-split-prompt.txt"
33		-	".config/opencode/agents/ai-commit.md"
34		-	".config/opencode/agents/ai-commit-plan.md"
35		-	)
	21	+	GIST_RAW_BASE="${GIST_RAW_BASE:-https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD}"
36	22
37	23		# =============================
38	24		# REQUIREMENTS
			@@ -87,90 +73,27 @@ install_starship() {
87	73		fi
88	74		}
89	75
90		-	download_configs() {
91		-	log "Downloading custom config files..."
92		-	for f in "${CONFIG_FILES[@]}"; do
93		-	# Strip the leading dot for the download URL
94		-	local remote_file="${f#.}"
95		-	[[ "$f" == ".config/starship.toml" ]] && remote_file="starship.toml"
96		-	[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_file="ai-commit-prompt.txt"
97		-	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_file="ai-commit-split-prompt.txt"
98		-	[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_file="ai-commit.md"
99		-	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_file="ai-commit-plan.md"
100		-	local url="$GIST_RAW_BASE/$remote_file"
101		-	local target="$HOME/$f"
102		-	local tmp="${target}.tmp.$$"
103		-
104		-	mkdir -p "$(dirname "$target")"
105		-
106		-	log "Fetching $remote_file -> $f ..."
107		-	if curl -fsSL "$url" -o "$tmp"; then
108		-	mv "$tmp" "$target"
109		-	else
	76	+	# Load the shared installer locally or fetch it for the curl-based entry point.
	77	+	load_config_installer() {
	78	+	local script_dir="" tmp
	79	+	if [[ -n "${BASH_SOURCE[0]:-}" && -f "${BASH_SOURCE[0]}" ]]; then
	80	+	script_dir="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
	81	+	fi
	82	+	if [[ -n "$script_dir" && -f "$script_dir/config.sh" ]]; then
	83	+	source "$script_dir/config.sh"
	84	+	else
	85	+	tmp="$(mktemp)" \|\| return 1
	86	+	if ! curl -fsSL "${GIST_RAW_BASE%/}/config.sh" -o "$tmp" \|\|
	87	+	[[ ! -s "$tmp" ]] \|\| ! bash -n "$tmp"; then
110	88		rm -f "$tmp"
111		-	warn "Failed to download $remote_file"
	89	+	err "Failed to load the shared configuration installer"
	90	+	return 1
112	91		fi
113		-	done
114		-
115		-	ok "Configs downloaded"
116		-	}
117		-
118		-	configure_zshrc() {
119		-	local zshrc="$HOME/.zshrc"
120		-	log "Configuring .zshrc for Oh My Zsh and Starship..."
121		-
122		-	cat > "$zshrc" <<'EOF'
123		-	# =============================================================================
124		-	# 1. HELPER FUNCTIONS & PATH
125		-	# =============================================================================
126		-	source_if_readable() {
127		-	local file="$1"
128		-	if [[ -f "$file" && -r "$file" ]]; then
129		-	source "$file"
	92	+	source "$tmp"
	93	+	rm -f "$tmp"
130	94		fi
131	95		}
132	96
133		-	export PATH="$HOME/.local/bin:$PATH"
134		-
135		-	# =============================================================================
136		-	# 2. OH MY ZSH FRAMEWORK
137		-	# =============================================================================
138		-	export ZSH="${ZSH:-$HOME/.oh-my-zsh}"
139		-	ZSH_THEME=""
140		-
141		-	plugins=(
142		-	git
143		-	zsh-autosuggestions
144		-	zsh-syntax-highlighting
145		-	)
146		-
147		-	source_if_readable "$ZSH/oh-my-zsh.sh"
148		-
149		-	# =============================================================================
150		-	# 3. THIRD-PARTY INITIALIZATION & CUSTOM CONFIGS
151		-	# =============================================================================
152		-	source_if_readable "$HOME/.sourcerc"
153		-	source_if_readable "$HOME/.func"
154		-	source_if_readable "$HOME/.pathrc"
155		-	source_if_readable "$HOME/.alias"
156		-
157		-	# =============================================================================
158		-	# 4. STARSHIP PROMPT
159		-	# =============================================================================
160		-	if [[ -z "${STARSHIP_CONFIG:-}" && -f "$HOME/.config/starship.toml" ]]; then
161		-	export STARSHIP_CONFIG="$HOME/.config/starship.toml"
162		-	fi
163		-
164		-	if command -v starship >/dev/null 2>&1; then
165		-	eval "$(starship init zsh)"
166		-	elif [[ -x "$HOME/.local/bin/starship" ]]; then
167		-	eval "$("$HOME/.local/bin/starship" init zsh)"
168		-	fi
169		-	EOF
170		-
171		-	ok ".zshrc configured for Oh My Zsh framework with Starship prompt"
172		-	}
173		-
174	97		configure_git_identity() {
175	98		log "Configuring global Git identity..."
176	99		git config --global user.name "Vernon Wee Hong KOH"
			@@ -258,6 +181,7 @@ run_choices() {
258	181		# =============================
259	182		main() {
260	183		check_requirements
	184	+	load_config_installer
261	185		while true; do
262	186		show_menu
263	187		run_choices
			@@ -267,4 +191,6 @@ main() {
267	191		ok "macOS minimal Zsh configuration complete!"
268	192		}
269	193
270		-	main "$@"
	194	+	if [[ "${BASH_SOURCE[0]:-$0}" == "$0" ]]; then
	195	+	main "$@"
	196	+	fi

zsh_ubuntu.sh

			@@ -22,20 +22,7 @@ SKIP_PACKAGES=false
22	22		SKIP_SHELL_CHANGE=false
23	23		INSTALL_HOMEBREW=false
24	24
25		-	GIST_RAW_BASE="https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD"
26		-	CONFIG_FILES=(
27		-	".alias"
28		-	".func"
29		-	".pathrc"
30		-	".sourcerc"
31		-	".vimrc"
32		-	".zshrc"
33		-	".config/starship.toml"
34		-	".config/ai-commit-prompt.txt"
35		-	".config/ai-commit-split-prompt.txt"
36		-	".config/opencode/agents/ai-commit.md"
37		-	".config/opencode/agents/ai-commit-plan.md"
38		-	)
	25	+	GIST_RAW_BASE="${GIST_RAW_BASE:-https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD}"
39	26
40	27		# =============================
41	28		# OS DETECTION
			@@ -179,89 +166,27 @@ install_starship() {
179	166		fi
180	167		}
181	168
182		-	download_configs() {
183		-	log "Downloading custom config files from OpenGist..."
184		-	for f in "${CONFIG_FILES[@]}"; do
185		-	local remote_file="${f#.}"
186		-	[[ "$f" == ".config/starship.toml" ]] && remote_file="starship.toml"
187		-	[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_file="ai-commit-prompt.txt"
188		-	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_file="ai-commit-split-prompt.txt"
189		-	[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_file="ai-commit.md"
190		-	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_file="ai-commit-plan.md"
191		-	local url="$GIST_RAW_BASE/$remote_file"
192		-	local target="$HOME/$f"
193		-	local tmp="${target}.tmp.$$"
194		-
195		-	mkdir -p "$(dirname "$target")"
196		-
197		-	log "Fetching $remote_file -> $f ..."
198		-	if curl -fsSL "$url" -o "$tmp"; then
199		-	mv "$tmp" "$target"
200		-	else
	169	+	# Load the shared installer locally or fetch it for the curl-based entry point.
	170	+	load_config_installer() {
	171	+	local script_dir="" tmp
	172	+	if [[ -n "${BASH_SOURCE[0]:-}" && -f "${BASH_SOURCE[0]}" ]]; then
	173	+	script_dir="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
	174	+	fi
	175	+	if [[ -n "$script_dir" && -f "$script_dir/config.sh" ]]; then
	176	+	source "$script_dir/config.sh"
	177	+	else
	178	+	tmp="$(mktemp)" \|\| return 1
	179	+	if ! curl -fsSL "${GIST_RAW_BASE%/}/config.sh" -o "$tmp" \|\|
	180	+	[[ ! -s "$tmp" ]] \|\| ! bash -n "$tmp"; then
201	181		rm -f "$tmp"
202		-	warn "Failed to download $remote_file"
	182	+	err "Failed to load the shared configuration installer"
	183	+	return 1
203	184		fi
204		-	done
205		-
206		-	ok "Configs downloaded"
207		-	}
208		-
209		-	configure_zshrc() {
210		-	local zshrc="$HOME/.zshrc"
211		-	log "Configuring .zshrc for Oh My Zsh and Starship..."
212		-
213		-	cat > "$zshrc" <<'EOF'
214		-	# =============================================================================
215		-	# 1. HELPER FUNCTIONS & PATH
216		-	# =============================================================================
217		-	source_if_readable() {
218		-	local file="$1"
219		-	if [[ -f "$file" && -r "$file" ]]; then
220		-	source "$file"
	185	+	source "$tmp"
	186	+	rm -f "$tmp"
221	187		fi
222	188		}
223	189
224		-	export PATH="$HOME/.local/bin:$PATH"
225		-
226		-	# =============================================================================
227		-	# 2. OH MY ZSH FRAMEWORK
228		-	# =============================================================================
229		-	export ZSH="${ZSH:-$HOME/.oh-my-zsh}"
230		-	ZSH_THEME=""
231		-
232		-	plugins=(
233		-	git
234		-	zsh-autosuggestions
235		-	zsh-syntax-highlighting
236		-	)
237		-
238		-	source_if_readable "$ZSH/oh-my-zsh.sh"
239		-
240		-	# =============================================================================
241		-	# 3. THIRD-PARTY INITIALIZATION & CUSTOM CONFIGS
242		-	# =============================================================================
243		-	source_if_readable "$HOME/.sourcerc"
244		-	source_if_readable "$HOME/.func"
245		-	source_if_readable "$HOME/.pathrc"
246		-	source_if_readable "$HOME/.alias"
247		-
248		-	# =============================================================================
249		-	# 4. STARSHIP PROMPT
250		-	# =============================================================================
251		-	if [[ -z "${STARSHIP_CONFIG:-}" && -f "$HOME/.config/starship.toml" ]]; then
252		-	export STARSHIP_CONFIG="$HOME/.config/starship.toml"
253		-	fi
254		-
255		-	if command -v starship >/dev/null 2>&1; then
256		-	eval "$(starship init zsh)"
257		-	elif [[ -x "$HOME/.local/bin/starship" ]]; then
258		-	eval "$("$HOME/.local/bin/starship" init zsh)"
259		-	fi
260		-	EOF
261		-
262		-	ok ".zshrc configured for Oh My Zsh framework with Starship prompt"
263		-	}
264		-
265	190		configure_git_identity() {
266	191		log "Configuring global Git identity..."
267	192		git config --global user.name "Vernon Wee Hong KOH"
			@@ -355,6 +280,7 @@ run_choices() {
355	280		# =============================
356	281		main() {
357	282		check_requirements
	283	+	load_config_installer
358	284		while true; do
359	285		show_menu
360	286		run_choices
			@@ -364,4 +290,6 @@ main() {
364	290		ok "Zsh installation/configuration complete!"
365	291		}
366	292
367		-	main "$@"
	293	+	if [[ "${BASH_SOURCE[0]:-$0}" == "$0" ]]; then
	294	+	main "$@"
	295	+	fi

zsh_wsl.sh

			@@ -22,20 +22,7 @@ SKIP_PACKAGES=false
22	22		SKIP_SHELL_CHANGE=false
23	23		INSTALL_HOMEBREW=false
24	24
25		-	GIST_RAW_BASE="https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD"
26		-	CONFIG_FILES=(
27		-	".alias"
28		-	".func"
29		-	".pathrc"
30		-	".sourcerc"
31		-	".vimrc"
32		-	".zshrc"
33		-	".config/starship.toml"
34		-	".config/ai-commit-prompt.txt"
35		-	".config/ai-commit-split-prompt.txt"
36		-	".config/opencode/agents/ai-commit.md"
37		-	".config/opencode/agents/ai-commit-plan.md"
38		-	)
	25	+	GIST_RAW_BASE="${GIST_RAW_BASE:-https://opengist.resetrix.work/weehong/f0d940c3c1214bf5b7996195199fdc09/raw/HEAD}"
39	26
40	27		# =============================
41	28		# PLATFORM DETECTION
			@@ -181,89 +168,27 @@ install_starship() {
181	168		fi
182	169		}
183	170
184		-	download_configs() {
185		-	log "Downloading custom config files from OpenGist..."
186		-	for f in "${CONFIG_FILES[@]}"; do
187		-	local remote_file="${f#.}"
188		-	[[ "$f" == ".config/starship.toml" ]] && remote_file="starship.toml"
189		-	[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_file="ai-commit-prompt.txt"
190		-	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_file="ai-commit-split-prompt.txt"
191		-	[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_file="ai-commit.md"
192		-	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_file="ai-commit-plan.md"
193		-	local url="$GIST_RAW_BASE/$remote_file"
194		-	local target="$HOME/$f"
195		-	local tmp="${target}.tmp.$$"
196		-
197		-	mkdir -p "$(dirname "$target")"
198		-
199		-	log "Fetching $remote_file -> $f ..."
200		-	if curl -fsSL "$url" -o "$tmp"; then
201		-	mv "$tmp" "$target"
202		-	else
	171	+	# Load the shared installer locally or fetch it for the curl-based entry point.
	172	+	load_config_installer() {
	173	+	local script_dir="" tmp
	174	+	if [[ -n "${BASH_SOURCE[0]:-}" && -f "${BASH_SOURCE[0]}" ]]; then
	175	+	script_dir="$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" && pwd)"
	176	+	fi
	177	+	if [[ -n "$script_dir" && -f "$script_dir/config.sh" ]]; then
	178	+	source "$script_dir/config.sh"
	179	+	else
	180	+	tmp="$(mktemp)" \|\| return 1
	181	+	if ! curl -fsSL "${GIST_RAW_BASE%/}/config.sh" -o "$tmp" \|\|
	182	+	[[ ! -s "$tmp" ]] \|\| ! bash -n "$tmp"; then
203	183		rm -f "$tmp"
204		-	warn "Failed to download $remote_file"
	184	+	err "Failed to load the shared configuration installer"
	185	+	return 1
205	186		fi
206		-	done
207		-
208		-	ok "Configs downloaded"
209		-	}
210		-
211		-	configure_zshrc() {
212		-	local zshrc="$HOME/.zshrc"
213		-	log "Configuring .zshrc for Oh My Zsh and Starship..."
214		-
215		-	cat > "$zshrc" <<'EOF'
216		-	# =============================================================================
217		-	# 1. HELPER FUNCTIONS & PATH
218		-	# =============================================================================
219		-	source_if_readable() {
220		-	local file="$1"
221		-	if [[ -f "$file" && -r "$file" ]]; then
222		-	source "$file"
	187	+	source "$tmp"
	188	+	rm -f "$tmp"
223	189		fi
224	190		}
225	191
226		-	export PATH="$HOME/.local/bin:$PATH"
227		-
228		-	# =============================================================================
229		-	# 2. OH MY ZSH FRAMEWORK
230		-	# =============================================================================
231		-	export ZSH="${ZSH:-$HOME/.oh-my-zsh}"
232		-	ZSH_THEME=""
233		-
234		-	plugins=(
235		-	git
236		-	zsh-autosuggestions
237		-	zsh-syntax-highlighting
238		-	)
239		-
240		-	source_if_readable "$ZSH/oh-my-zsh.sh"
241		-
242		-	# =============================================================================
243		-	# 3. THIRD-PARTY INITIALIZATION & CUSTOM CONFIGS
244		-	# =============================================================================
245		-	source_if_readable "$HOME/.sourcerc"
246		-	source_if_readable "$HOME/.func"
247		-	source_if_readable "$HOME/.pathrc"
248		-	source_if_readable "$HOME/.alias"
249		-
250		-	# =============================================================================
251		-	# 4. STARSHIP PROMPT
252		-	# =============================================================================
253		-	if [[ -z "${STARSHIP_CONFIG:-}" && -f "$HOME/.config/starship.toml" ]]; then
254		-	export STARSHIP_CONFIG="$HOME/.config/starship.toml"
255		-	fi
256		-
257		-	if command -v starship >/dev/null 2>&1; then
258		-	eval "$(starship init zsh)"
259		-	elif [[ -x "$HOME/.local/bin/starship" ]]; then
260		-	eval "$("$HOME/.local/bin/starship" init zsh)"
261		-	fi
262		-	EOF
263		-
264		-	ok ".zshrc configured for Oh My Zsh framework with Starship prompt"
265		-	}
266		-
267	192		configure_git_identity() {
268	193		log "Configuring global Git identity..."
269	194		git config --global user.name "Vernon Wee Hong KOH"
			@@ -357,6 +282,7 @@ run_choices() {
357	282		# =============================
358	283		main() {
359	284		check_requirements
	285	+	load_config_installer
360	286		while true; do
361	287		show_menu
362	288		run_choices
			@@ -366,4 +292,6 @@ main() {
366	292		ok "WSL Zsh installation/configuration complete!"
367	293		}
368	294
369		-	main "$@"
	295	+	if [[ "${BASH_SOURCE[0]:-$0}" == "$0" ]]; then
	296	+	main "$@"
	297	+	fi

weehong revisó este gist 1 day ago. Ir a la revisión

1 file changed, 14 insertions, 1 deletion

func

			@@ -1134,6 +1134,7 @@ aicommit() {
1134	1134		local assume_yes=0
1135	1135		local arg
1136	1136		local diff
	1137	+	local single_hint
1137	1138		local staged_count
1138	1139		local prompt_file="$HOME/.config/ai-commit-prompt.txt"
1139	1140
			@@ -1189,9 +1190,21 @@ aicommit() {
1189	1190		return 1
1190	1191		fi
1191	1192
	1193	+	# Above 30 paths a single commit is the user's explicit choice; tell the AI so
	1194	+	# it does not refuse under the prompt's own split rule.
	1195	+	single_hint=""
	1196	+	if [ "$staged_count" -gt 30 ]; then
	1197	+	if [ "$single" -eq 1 ]; then
	1198	+	printf "📦 Committing all %s staged paths as a single commit.\n" "$staged_count" >&2
	1199	+	fi
	1200	+	single_hint="USER OVERRIDE: The user explicitly chose ONE commit for all $staged_count staged paths. This overrides any instruction above about splitting commits above 30 paths or by module. Do not refuse, do not suggest --modules, and do not ask for confirmation. Create exactly one commit covering everything staged, with a summary line for the overall change and a body that groups the changes by area.
	1201	+
	1202	+	"
	1203	+	fi
	1204	+
1192	1205		_aicommit_engine "$engine" commit "$(cat "$prompt_file")
1193	1206
1194		-	Staged path count: $staged_count
	1207	+	${single_hint}Staged path count: $staged_count
1195	1208
1196	1209		Here is the git diff:
1197	1210		$diff"

weehong revisó este gist 1 day ago. Ir a la revisión

1 file changed, 40 insertions, 6 deletions

func

			@@ -733,9 +733,30 @@ plan_build() {
733	733		# Internal: _aicommit_usage (Print aicommit usage)
734	734		# -----------------------------------------------------------------------------
735	735		_aicommit_usage() {
736		-	printf "Usage: aicommit [--modules] [--yes] [claude \| copilot \| opencode]\n"
737		-	printf " --modules Force per-module commits (automatic above 30 staged paths)\n"
738		-	printf " --yes Skip the plan confirmation for per-module commits\n"
	736	+	printf "Usage: aicommit [--modules \| --single] [--yes] [claude \| copilot \| opencode]\n"
	737	+	printf " --modules Split into per module commits without asking\n"
	738	+	printf " --single Make one commit without asking, even above 30 staged paths\n"
	739	+	printf " --yes Accept defaults: split above 30 paths and skip the plan confirmation\n"
	740	+	}
	741	+
	742	+	# -----------------------------------------------------------------------------
	743	+	# Internal: _aicommit_ask_modules (Ask whether to split above 30 staged paths)
	744	+	# -----------------------------------------------------------------------------
	745	+	_aicommit_ask_modules() {
	746	+	local staged_count="$1"
	747	+	local reply
	748	+
	749	+	if ! (: </dev/tty) 2>/dev/null; then
	750	+	printf "🧩 %s staged paths exceed 30 and no terminal is available; splitting by module.\n" "$staged_count" >&2
	751	+	return 0
	752	+	fi
	753	+
	754	+	printf "🧩 %s staged paths exceed 30. Split into per module commits? (Y/n) " "$staged_count" >/dev/tty
	755	+	IFS= read -r reply </dev/tty \|\| reply=""
	756	+	case "$reply" in
	757	+	""\|y\|Y\|yes\|YES\|Yes) return 0 ;;
	758	+	*) return 1 ;;
	759	+	esac
739	760		}
740	761
741	762		# -----------------------------------------------------------------------------
			@@ -1109,6 +1130,7 @@ _aicommit_modules() {
1109	1130		aicommit() {
1110	1131		local engine="claude"
1111	1132		local modules=0
	1133	+	local single=0
1112	1134		local assume_yes=0
1113	1135		local arg
1114	1136		local diff
			@@ -1119,6 +1141,7 @@ aicommit() {
1119	1141		case "$arg" in
1120	1142		claude\|copilot\|opencode) engine="$arg" ;;
1121	1143		--modules) modules=1 ;;
	1144	+	--single) single=1 ;;
1122	1145		-y\|--yes) assume_yes=1 ;;
1123	1146		-h\|--help)
1124	1147		_aicommit_usage
			@@ -1132,6 +1155,11 @@ aicommit() {
1132	1155		esac
1133	1156		done
1134	1157
	1158	+	if [ "$modules" -eq 1 ] && [ "$single" -eq 1 ]; then
	1159	+	printf "❌ Error: --modules and --single cannot be used together.\n" >&2
	1160	+	return 1
	1161	+	fi
	1162	+
1135	1163		if [ ! -f "$prompt_file" ]; then
1136	1164		printf "❌ Error: Configuration file not found at ~/.config/ai-commit-prompt.txt\n" >&2
1137	1165		printf "Please create it and paste your system prompt inside.\n" >&2
			@@ -1141,10 +1169,16 @@ aicommit() {
1141	1169		# Count the full index, including excluded previews and both sides of renames.
1142	1170		# NUL delimiters keep whitespace/newlines in filenames from skewing the count.
1143	1171		staged_count="$(set -o pipefail; git diff --cached --name-only --no-renames -z \| tr -cd '\0' \| wc -c)" \|\| return 1
1144		-	if [ "$staged_count" -gt 30 ] && [ "$modules" -ne 1 ]; then
1145		-	printf "🧩 %s staged paths exceed 30; splitting commits by module.\n" "$staged_count" >&2
	1172	+
	1173	+	if [ "$modules" -ne 1 ] && [ "$single" -ne 1 ] && [ "$staged_count" -gt 30 ]; then
	1174	+	if [ "$assume_yes" -eq 1 ] \|\| _aicommit_ask_modules "$staged_count"; then
	1175	+	modules=1
	1176	+	else
	1177	+	printf "📦 Committing all %s staged paths as a single commit.\n" "$staged_count" >&2
	1178	+	fi
1146	1179		fi
1147		-	if [ "$modules" -eq 1 ] \|\| [ "$staged_count" -gt 30 ]; then
	1180	+
	1181	+	if [ "$modules" -eq 1 ]; then
1148	1182		_aicommit_modules "$engine" "$assume_yes"
1149	1183		return
1150	1184		fi

Vernon Wee Hong KOH revisó este gist 3 days ago. Ir a la revisión

1 file changed, 12 insertions, 5 deletions

func

			@@ -147,17 +147,24 @@ ch() {
147	147		opencode)
148	148		local opencode_state_home="${XDG_STATE_HOME:-$HOME/.local/state}/opencode"
149	149		local opencode_data_home="${XDG_DATA_HOME:-$HOME/.local/share}/opencode"
	150	+	local opencode_db="${OPENCODE_DB:-$opencode_data_home/opencode.db}"
	151	+
	152	+	require_cli opencode "OpenCode CLI" \|\| return 1
	153	+	# Close OpenCode clients before running this from a separate shell.
	154	+	# Stop the service before unlinking its database and SQLite sidecars.
	155	+	command opencode service stop \|\| return 1
150	156
151	157		command mkdir -p -- "$opencode_state_home" "$opencode_data_home" \|\| return 1
152	158		: > "$opencode_state_home/prompt-history.jsonl" \|\| return 1
153	159		command rm -f -- \
154		-	"$opencode_data_home/opencode.db" \
155		-	"$opencode_data_home/opencode.db-shm" \
156		-	"$opencode_data_home/opencode.db-wal" \|\| return 1
	160	+	"$opencode_db" \
	161	+	"$opencode_db-shm" \
	162	+	"$opencode_db-wal" \
	163	+	"$opencode_db-journal" \|\| return 1
157	164		command rm -rf -- "$opencode_data_home/repos" "$opencode_data_home/log" "$opencode_data_home/snapshot" \|\| return 1
158	165		command mkdir -p -- "$opencode_data_home/repos" "$opencode_data_home/log" "$opencode_data_home/snapshot" \|\| return 1
159	166
160		-	echo "OpenCode history cleared."
	167	+	echo "OpenCode database and history cleared. Launch OpenCode to start fresh."
161	168		;;
162	169
163	170		""\|shell)
			@@ -1359,4 +1366,4 @@ add_path_to_config() {
1359	1366
1360	1367		printf "✅ Success: Added to %s\n" "$config_file"
1361	1368		append_path "$new_path" && export PATH
1362		-	}
	1369	+	}

weehong revisó este gist 6 days ago. Ir a la revisión

2 files changed, 38 insertions, 3 deletions

func

			@@ -739,6 +739,31 @@ _aicommit_staged_diff() {
739	739		git diff --cached -- . ":(exclude).lock" ":(exclude)-lock.json" ":(exclude)*.min.js" \| head -c 100000
740	740		}
741	741
	742	+	# -----------------------------------------------------------------------------
	743	+	# Internal: _aicommit_opencode_model (Read OpenCode's most recent model selection)
	744	+	# -----------------------------------------------------------------------------
	745	+	_aicommit_opencode_model() {
	746	+	python3 - <<'PY'
	747	+	import json
	748	+	import os
	749	+	from pathlib import Path
	750	+
	751	+	state = Path(os.environ.get("XDG_STATE_HOME") or Path.home() / ".local/state")
	752	+	try:
	753	+	data = json.loads((state / "opencode/model.json").read_text())
	754	+	recent = data.get("recent", [])
	755	+	if recent:
	756	+	selected = recent[0]
	757	+	model = selected["providerID"] + "/" + selected["modelID"]
	758	+	variant = data.get("variant", {}).get(model)
	759	+	if variant and variant != "default":
	760	+	model += "#" + variant
	761	+	print(model)
	762	+	except FileNotFoundError:
	763	+	pass # Let OpenCode use its configured default on a fresh installation.
	764	+	PY
	765	+	}
	766	+
742	767		# -----------------------------------------------------------------------------
743	768		# Internal: _aicommit_engine (Ask an AI CLI to commit or to plan a split)
744	769		# -----------------------------------------------------------------------------
			@@ -747,6 +772,16 @@ _aicommit_engine() {
747	772		local mode="$2"
748	773		local input="$3"
749	774		local name
	775	+	local selected_model
	776	+	local -a model_args
	777	+	model_args=()
	778	+
	779	+	if [ "$engine" = "opencode" ]; then
	780	+	selected_model="$(_aicommit_opencode_model)" \|\| return 1
	781	+	if [ -n "$selected_model" ]; then
	782	+	model_args=(--model "$selected_model")
	783	+	fi
	784	+	fi
750	785
751	786		case "$engine" in
752	787		claude) name="Claude" ;;
			@@ -779,10 +814,10 @@ _aicommit_engine() {
779	814		copilot -p "$input" -s --no-ask-user
780	815		;;
781	816		opencode:commit)
782		-	printf "%s\n" "$input" \| opencode run --agent ai-commit
	817	+	printf "%s\n" "$input" \| opencode run --agent ai-commit "${model_args[@]}"
783	818		;;
784	819		opencode:plan)
785		-	printf "%s\n" "$input" \| opencode run --agent ai-commit-plan
	820	+	printf "%s\n" "$input" \| opencode run --agent ai-commit-plan "${model_args[@]}"
786	821		;;
787	822		esac
788	823		}
			@@ -1324,4 +1359,4 @@ add_path_to_config() {
1324	1359
1325	1360		printf "✅ Success: Added to %s\n" "$config_file"
1326	1361		append_path "$new_path" && export PATH
1327		-	}
	1362	+	}

Archivo vacío

Vernon Wee Hong KOH revisó este gist 1 week ago. Ir a la revisión

1 file changed, 4 insertions

func

			@@ -176,6 +176,10 @@ ch() {
176	176		return 2
177	177		;;
178	178		esac
	179	+
	180	+	if [ -t 1 ]; then
	181	+	command clear
	182	+	fi
179	183		}
180	184
181	185		# -----------------------------------------------------------------------------

Vernon Wee Hong KOH revisó este gist 1 week ago. Ir a la revisión

7 files changed, 192 insertions, 7 deletions

README.md

			@@ -41,13 +41,15 @@ aicommit opencode
41	41
42	42		The installers place the shared commit instructions at `~/.config/ai-commit-prompt.txt` and the required OpenCode agent at `~/.config/opencode/agents/ai-commit.md`. The agent is hidden from the interactive agent selector but remains available to `aicommit opencode`. It may inspect Git status, the cached diff, and recent history, and may execute `git commit`; all unrelated tools and shell commands are denied.
43	43
44		-	Pass `--modules` to split a large staged change into one commit per module instead:
	44	+	Changes affecting more than 30 staged paths automatically use per-module commits. They must produce multiple commits, rather than a single combined commit message. The count uses the full staged set before diff filtering or truncation, including lock/minified files and both paths of a rename. Exactly 30 paths retains the single-commit default. Pass `--modules` to request splitting at any size:
45	45
46	46		```zsh
47	47		aicommit --modules opencode
48	48		aicommit --modules --yes claude
49	49		```
50	50
	51	+	Automatic splitting uses the same planning and confirmation flow as `--modules`; `--yes` skips confirmation in either case (for example, `aicommit --yes opencode`). Plans that collapse a change above the threshold into one group are rejected before committing, with the index untouched. Grouping follows cohesive modules or submodules; 30 is the automatic-splitting threshold, not a hard size limit per planned module.
	52	+
51	53		The engine first plans the split using `~/.config/ai-commit-split-prompt.txt` and replies with a JSON plan that maps every staged path to a `type(scope)` group, ordered so dependencies land first. The function validates the plan against the staged paths, ignores paths that are not staged, appends any unplanned paths as a final commit, and shows the plan for confirmation (`--yes` skips it). It then stages each group from a snapshot of the original index, so partially staged files keep only their staged hunks and unstaged or untracked work is never touched, and asks the engine to commit that group with the normal commit instructions. If a group produces no commit, or a commit includes files outside its group, the run stops and restages the remaining groups. With OpenCode, planning uses the hidden `ai-commit-plan` agent at `~/.config/opencode/agents/ai-commit-plan.md`, which is denied every tool. Python 3 is required to parse the plan.
52	54
53	55		## Plan-build workflow

ai-commit-plan.md

			@@ -7,3 +7,5 @@ permission:
7	7		---
8	8
9	9		Follow the supplied planning instructions and staged file list. Reply with only the JSON plan. Do not run commands, modify files, or change the staged set.
	10	+
	11	+	Changes affecting more than 30 staged paths must be modularized into at least two non-empty commits; never return a single combined group. Count the full staged file list, including lock/minified files and both paths of a rename. Split a large module into cohesive, independently reviewable submodules. At 30 paths or fewer, a single group is allowed if the changes form one module. This threshold is not a hard file limit per planned module.

ai-commit-prompt.txt

			@@ -18,6 +18,18 @@ git diff --cached
18	18
19	19		## Strict Rules (Zero Tolerance)
20	20
	21	+	### Mandatory Module Splitting
	22	+	Changes affecting more than 30 staged paths MUST be modularized into
	23	+	multiple commits. Do not generate or execute a single combined commit for
	24	+	them. Count the full staged set, including lock/minified files omitted from
	25	+	the diff preview and both paths of a rename, not just the visible diff.
	26	+	If this input has more than 30 staged paths and is not explicitly identified
	27	+	as one module in a multi-commit plan, stop and request `aicommit --modules`.
	28	+	This refusal takes precedence over the output and execution instructions below.
	29	+	When the input says "commit X of Y, split by module" with Y greater than 1,
	30	+	generate and execute only that module's commit. The threshold applies to
	31	+	the original staged change, not a hard file limit per planned module.
	32	+
21	33		### 1. Header Format
22	34		Pattern: `type(scope): subject`
23	35

ai-commit-split-prompt.txt

			@@ -49,8 +49,13 @@ to a single Conventional Commit `type(scope)`. Typical modules:
49	49		6. Each commit should have ONE type and ONE scope. If a group would need two
50	50		types (e.g. `feat` and `docs`), split it.
51	51		7. Do not over-split. A module normally spans several files; do not create
52		-	one commit per file unless each file really is its own module. If all the
53		-	changes form one module, return a single commit.
	52	+	one commit per file unless each file really is its own module. Changes
	53	+	affecting more than 30 staged paths MUST be modularized into at least two
	54	+	non-empty commits; never return a single combined commit for them. Count
	55	+	all staged paths, including lock/minified files and both paths of a rename.
	56	+	Split a large module into cohesive, independently reviewable submodules.
	57	+	At 30 paths or fewer, a single commit is allowed if all changes form one
	58	+	module. This threshold is not a hard file limit per planned module.
54	59		8. Order commits so dependencies land first:
55	60		build/deps -> shared code (ui, i18n, lib, types) -> features that use
56	61		them -> tests -> stories/docs.

ai-commit.md

			@@ -12,4 +12,6 @@ permission:
12	12		"git commit *": allow
13	13		---
14	14
15		-	Follow the supplied commit instructions and staged diff. Generate a concise conventional commit message, then execute exactly one `git commit` with that message. You may inspect Git status, the cached diff, and recent log. Do not modify files or change the staged set.
	15	+	Follow the supplied commit instructions and staged diff. Changes affecting more than 30 staged paths must be modularized into multiple commits; never emit or execute a single combined commit for them. Use the supplied full staged path count, or inspect `git diff --cached --name-only --no-renames` if it is absent, including files omitted from the diff preview. Unless the input explicitly identifies this as one module in a multi-commit plan ("commit X of Y, split by module", Y > 1), stop and request `aicommit --modules` when the count exceeds 30. This refusal takes precedence over commit execution.
	16	+
	17	+	For an eligible staged change or an individual module from that plan, generate a concise conventional commit message, then execute exactly one `git commit` with that message. You may inspect Git status, the cached diff, and recent log. Do not modify files or change the staged set.

func

			@@ -723,8 +723,8 @@ plan_build() {
723	723		# -----------------------------------------------------------------------------
724	724		_aicommit_usage() {
725	725		printf "Usage: aicommit [--modules] [--yes] [claude \| copilot \| opencode]\n"
726		-	printf " --modules Split staged changes into one commit per module\n"
727		-	printf " --yes Skip the plan confirmation in --modules mode\n"
	726	+	printf " --modules Force per-module commits (automatic above 30 staged paths)\n"
	727	+	printf " --yes Skip the plan confirmation for per-module commits\n"
728	728		}
729	729
730	730		# -----------------------------------------------------------------------------
			@@ -874,6 +874,9 @@ if missing:
874	874		warnings.append("%d staged path(s) were not planned; adding them as a final commit" % len(missing))
875	875		groups.append(("", missing))
876	876
	877	+	if len(staged) > 30 and len(groups) < 2:
	878	+	sys.exit("❌ Error: Changes affecting more than 30 staged paths require multiple module commits.")
	879	+
877	880		for number, (label, files) in enumerate(groups, 1):
878	881		base = os.path.join(run_dir, "%03d" % number)
879	882		with open(base + ".files", "wb") as fh:
			@@ -1063,6 +1066,7 @@ aicommit() {
1063	1066		local assume_yes=0
1064	1067		local arg
1065	1068		local diff
	1069	+	local staged_count
1066	1070		local prompt_file="$HOME/.config/ai-commit-prompt.txt"
1067	1071
1068	1072		for arg in "$@"; do
			@@ -1088,7 +1092,13 @@ aicommit() {
1088	1092		return 1
1089	1093		fi
1090	1094
1091		-	if [ "$modules" -eq 1 ]; then
	1095	+	# Count the full index, including excluded previews and both sides of renames.
	1096	+	# NUL delimiters keep whitespace/newlines in filenames from skewing the count.
	1097	+	staged_count="$(set -o pipefail; git diff --cached --name-only --no-renames -z \| tr -cd '\0' \| wc -c)" \|\| return 1
	1098	+	if [ "$staged_count" -gt 30 ] && [ "$modules" -ne 1 ]; then
	1099	+	printf "🧩 %s staged paths exceed 30; splitting commits by module.\n" "$staged_count" >&2
	1100	+	fi
	1101	+	if [ "$modules" -eq 1 ] \|\| [ "$staged_count" -gt 30 ]; then
1092	1102		_aicommit_modules "$engine" "$assume_yes"
1093	1103		return
1094	1104		fi
			@@ -1101,6 +1111,8 @@ aicommit() {
1101	1111
1102	1112		_aicommit_engine "$engine" commit "$(cat "$prompt_file")
1103	1113
	1114	+	Staged path count: $staged_count
	1115	+
1104	1116		Here is the git diff:
1105	1117		$diff"
1106	1118		}

test_aicommit.py(archivo creado)

		@@ -0,0 +1,150 @@
1	+	#!/usr/bin/env python3
2	+	"""Exercise aicommit routing and plan validation without invoking an AI CLI."""
3	+
4	+	import json
5	+	import os
6	+	from pathlib import Path
7	+	import subprocess
8	+	import tempfile
9	+	import unittest
10	+
11	+
12	+	SOURCE = Path(__file__).resolve().parent / "func"
13	+	ROUTE = '''
14	+	source "$1"
15	+	shift
16	+	_aicommit_engine() { printf 'ENGINE %s %s\n' "$1" "$2"; }
17	+	_aicommit_modules() { printf 'MODULES %s %s\n' "$1" "$2"; return 7; }
18	+	aicommit "$@"
19	+	'''
20	+
21	+
22	+	class AicommitTests(unittest.TestCase):
23	+	def setUp(self):
24	+	self.temp = tempfile.TemporaryDirectory(prefix="aicommit-test-")
25	+	self.addCleanup(self.temp.cleanup)
26	+	self.root = Path(self.temp.name)
27	+	self.repo = self.root / "repo"
28	+	self.repo.mkdir()
29	+	self.home = self.root / "home"
30	+	config = self.home / ".config"
31	+	config.mkdir(parents=True)
32	+	for name in ("ai-commit-prompt.txt", "ai-commit-split-prompt.txt"):
33	+	(config / name).write_text((SOURCE.parent / name).read_text())
34	+	self.env = {**os.environ, "HOME": str(self.home)}
35	+	self.git("init", "-q")
36	+
37	+	def git(self, *args):
38	+	return subprocess.check_output(
39	+	["git", *args], cwd=self.repo, env=self.env
40	+	)
41	+
42	+	def shell(self, script, *args, cwd=None):
43	+	return subprocess.run(
44	+	["zsh", "-f", "-c", script, "test", str(SOURCE), *args],
45	+	cwd=cwd or self.repo, env=self.env, text=True, capture_output=True,
46	+	)
47	+
48	+	def stage(self, count, suffix=".txt"):
49	+	# A newline is part of one path, not an extra staged file.
50	+	files = [f"file {i}{suffix}" for i in range(count)]
51	+	if files:
52	+	files[0] = "line\nbreak" + suffix
53	+	for name in files:
54	+	(self.repo / name).write_text("staged content\n")
55	+	self.git("add", "--all")
56	+	return files
57	+
58	+	def test_thirty_paths_use_single_commit(self):
59	+	self.stage(30)
60	+	result = self.shell(ROUTE, "opencode")
61	+	self.assertEqual(result.returncode, 0, result.stderr)
62	+	self.assertEqual(result.stdout.strip(), "ENGINE opencode commit")
63	+
64	+	def test_thirty_one_paths_route_all_engines_and_forward_yes(self):
65	+	self.stage(31)
66	+	for engine in ("claude", "copilot", "opencode"):
67	+	with self.subTest(engine=engine):
68	+	result = self.shell(ROUTE, "--yes", engine)
69	+	self.assertEqual(result.returncode, 7, result.stderr)
70	+	self.assertEqual(result.stdout.strip(), f"MODULES {engine} 1")
71	+	self.assertIn("exceed 30", result.stderr)
72	+
73	+	def test_explicit_modules_below_threshold(self):
74	+	self.stage(1)
75	+	result = self.shell(ROUTE, "--modules", "copilot")
76	+	self.assertEqual(result.returncode, 7, result.stderr)
77	+	self.assertEqual(result.stdout.strip(), "MODULES copilot 0")
78	+
79	+	def test_filtered_files_still_trigger_modules_from_subdirectory(self):
80	+	self.stage(31, ".lock")
81	+	nested = self.repo / "nested"
82	+	nested.mkdir()
83	+	result = self.shell(ROUTE, cwd=nested)
84	+	self.assertEqual(result.returncode, 7, result.stderr)
85	+	self.assertEqual(result.stdout.strip(), "MODULES claude 0")
86	+
87	+	def test_empty_index_and_git_errors_never_call_engine(self):
88	+	for cwd in (self.repo, self.root):
89	+	with self.subTest(cwd=cwd):
90	+	result = self.shell(ROUTE, cwd=cwd)
91	+	self.assertNotEqual(result.returncode, 0)
92	+	self.assertNotIn("ENGINE", result.stdout)
93	+	self.assertNotIn("MODULES", result.stdout)
94	+
95	+	def plan(self, count, groups):
96	+	run = self.root / "plan"
97	+	run.mkdir()
98	+	files = [f"file-{i}" for i in range(count)]
99	+	(run / "staged").write_bytes(b"".join(p.encode() + b"\0" for p in files))
100	+	(run / "plan.out").write_text(json.dumps({"commits": [
101	+	{"type": "feat", "scope": "test", "files": group(files)}
102	+	for group in groups
103	+	]}))
104	+	return self.shell('source "$1"; _aicommit_plan "$2"', str(run)), run
105	+
106	+	def test_single_group_plan_allowed_at_thirty(self):
107	+	result, run = self.plan(30, [lambda files: files])
108	+	self.assertEqual(result.returncode, 0, result.stderr)
109	+	self.assertEqual((run / "count").read_text(), "1")
110	+
111	+	def test_single_group_plan_rejected_above_thirty_after_deduplication(self):
112	+	result, run = self.plan(31, [lambda files: files, lambda files: files])
113	+	self.assertNotEqual(result.returncode, 0)
114	+	self.assertIn("require multiple module commits", result.stderr)
115	+	self.assertFalse((run / "count").exists())
116	+
117	+	def test_empty_plan_cannot_fall_back_to_one_large_commit(self):
118	+	result, _ = self.plan(31, [])
119	+	self.assertNotEqual(result.returncode, 0)
120	+	self.assertIn("require multiple module commits", result.stderr)
121	+
122	+	def test_multiple_groups_allowed_even_with_large_module(self):
123	+	result, run = self.plan(32, [lambda files: files[:-1], lambda files: files[-1:]])
124	+	self.assertEqual(result.returncode, 0, result.stderr)
125	+	self.assertEqual((run / "count").read_text(), "2")
126	+
127	+	def test_rejected_auto_plan_preserves_partial_index_and_worktree(self):
128	+	files = self.stage(31)
129	+	changed = self.repo / files[0]
130	+	changed.write_text("unstaged content\n")
131	+	before = self.git("write-tree")
132	+	plan = self.root / "single-plan.json"
133	+	plan.write_text(json.dumps({"commits": [{"files": files}]}))
134	+	result = self.shell('''
135	+	source "$1"
136	+	plan_file="$2"
137	+	_aicommit_engine() {
138	+	if [ "$2" = plan ]; then cat "$plan_file"; else printf 'UNEXPECTED COMMIT\n'; fi
139	+	}
140	+	aicommit --yes opencode
141	+	''', str(plan))
142	+	self.assertNotEqual(result.returncode, 0)
143	+	self.assertIn("require multiple module commits", result.stderr)
144	+	self.assertNotIn("UNEXPECTED COMMIT", result.stdout)
145	+	self.assertEqual(self.git("write-tree"), before)
146	+	self.assertEqual(changed.read_text(), "unstaged content\n")
147	+
148	+
149	+	if __name__ == "__main__":
150	+	unittest.main()

Vernon Wee Hong KOH revisó este gist 2 weeks ago. Ir a la revisión

8 files changed, 492 insertions, 40 deletions

README.md

			@@ -33,7 +33,7 @@ Starship owns the prompt and loads after Oh My Zsh. The managed Starship config
33	33
34	34		## AI commits
35	35
36		-	The managed `aicommit` function can use Claude, Codex, Copilot, or OpenCode to create a commit from staged changes:
	36	+	The managed `aicommit` function can use Claude, Copilot, or OpenCode to create a commit from staged changes:
37	37
38	38		```zsh
39	39		aicommit opencode
			@@ -41,6 +41,15 @@ aicommit opencode
41	41
42	42		The installers place the shared commit instructions at `~/.config/ai-commit-prompt.txt` and the required OpenCode agent at `~/.config/opencode/agents/ai-commit.md`. The agent is hidden from the interactive agent selector but remains available to `aicommit opencode`. It may inspect Git status, the cached diff, and recent history, and may execute `git commit`; all unrelated tools and shell commands are denied.
43	43
	44	+	Pass `--modules` to split a large staged change into one commit per module instead:
	45	+
	46	+	```zsh
	47	+	aicommit --modules opencode
	48	+	aicommit --modules --yes claude
	49	+	```
	50	+
	51	+	The engine first plans the split using `~/.config/ai-commit-split-prompt.txt` and replies with a JSON plan that maps every staged path to a `type(scope)` group, ordered so dependencies land first. The function validates the plan against the staged paths, ignores paths that are not staged, appends any unplanned paths as a final commit, and shows the plan for confirmation (`--yes` skips it). It then stages each group from a snapshot of the original index, so partially staged files keep only their staged hunks and unstaged or untracked work is never touched, and asks the engine to commit that group with the normal commit instructions. If a group produces no commit, or a commit includes files outside its group, the run stops and restages the remaining groups. With OpenCode, planning uses the hidden `ai-commit-plan` agent at `~/.config/opencode/agents/ai-commit-plan.md`, which is denied every tool. Python 3 is required to parse the plan.
	52	+
44	53		## Plan-build workflow
45	54
46	55		The local `plan_build` function is a thin cached launcher for the canonical public [plan-build gist](https://opengist.resetrix.work/weehong/plan-build). When curl is available, each invocation stages `plan_build.zsh`, `SKILL.md`, and `ARCHITECT.md`, requires all three to be non-empty, and syntax-checks the executable. It then moves the complete bundle into a unique immutable release directory and atomically switches one `current` symlink. Refresh activation is serialized with a kernel-backed Zsh file lock so concurrent callers cannot mix releases and crashes cannot leave a stale lock. If refresh fails, the launcher preserves and uses the last complete, validated release and repairs its skill links. Zsh is always required; curl is required only when no valid cached release exists.

ai-commit-plan.md(archivo creado)

		@@ -0,0 +1,9 @@
1	+	---
2	+	description: Plans how to split the staged diff supplied in the prompt into per-module commits.
3	+	mode: primary
4	+	hidden: true
5	+	permission:
6	+	"*": deny
7	+	---
8	+
9	+	Follow the supplied planning instructions and staged file list. Reply with only the JSON plan. Do not run commands, modify files, or change the staged set.

ai-commit-split-prompt.txt(archivo creado)

		@@ -0,0 +1,91 @@
1	+	# Git Commit Split Planner Prompt
2	+
3	+	## Role
4	+	You are an Automated Git Commit Planner.
5	+
6	+	## Objective
7	+	Split the staged changes into a sequence of small, atomic commits, one per
8	+	module. You only decide the grouping and order. You do NOT write commit
9	+	messages and you do NOT run any commands.
10	+
11	+	---
12	+
13	+	## Input
14	+	1. The staged file list (`git diff --cached --name-status -M`)
15	+	2. A diffstat (`git diff --cached --numstat -M`: added, deleted, path)
16	+	3. The staged diff (lock files and minified files are omitted; it may be truncated)
17	+
18	+	---
19	+
20	+	## What Is a Module
21	+	A module is one cohesive, independently reviewable unit of change that maps
22	+	to a single Conventional Commit `type(scope)`. Typical modules:
23	+
24	+	\| Module \| Example scope \|
25	+	\| :--- \| :--- \|
26	+	\| A feature or domain area (pages, routes, services, models) \| `organisation`, `auth` \|
27	+	\| Shared UI components / design system \| `ui` \|
28	+	\| Translations / localisation \| `i18n` \|
29	+	\| End-to-end or integration tests not tied to one module \| `e2e` \|
30	+	\| Storybook stories \| `storybook` \|
31	+	\| Documentation \| `docs` \|
32	+	\| Build, dependencies, tooling config \| `deps`, `eslint` \|
33	+	\| CI/CD pipelines \| `ci` \|
34	+
35	+	---
36	+
37	+	## Strict Rules (Zero Tolerance)
38	+
39	+	1. Every path in the staged file list MUST appear in exactly one commit.
40	+	Copy paths exactly as listed. Never invent, rename, or omit a path.
41	+	2. A rename line (`R<score> old new`) lists two paths. Put BOTH in the same
42	+	commit.
43	+	3. Never split a single file across commits.
44	+	4. Lock files go in the same commit as the manifest that changed them
45	+	(e.g. `package.json` with `package-lock.json`).
46	+	5. Unit tests that sit next to, or only exercise, one module go in that
47	+	module's commit. E2E tests, storybook stories and docs get their own
48	+	commits unless they are the only change.
49	+	6. Each commit should have ONE type and ONE scope. If a group would need two
50	+	types (e.g. `feat` and `docs`), split it.
51	+	7. Do not over-split. A module normally spans several files; do not create
52	+	one commit per file unless each file really is its own module. If all the
53	+	changes form one module, return a single commit.
54	+	8. Order commits so dependencies land first:
55	+	build/deps -> shared code (ui, i18n, lib, types) -> features that use
56	+	them -> tests -> stories/docs.
57	+
58	+	---
59	+
60	+	## Output Format
61	+
62	+	Output ONLY one JSON object. No prose, no explanation, no markdown fences.
63	+
64	+	```json
65	+	{"commits":[{"type":"feat","scope":"i18n","files":["src/locales/en/organisation.json"]}]}
66	+	```
67	+
68	+	* `type`: one of `feat`, `fix`, `docs`, `style`, `refactor`, `perf`,
69	+	`test`, `build`, `ci`, `chore`
70	+	* `scope`: lowercase scope, or an empty string if none fits
71	+	* `files`: the exact paths from the staged file list
72	+
73	+	---
74	+
75	+	## Example
76	+
77	+	* Staged files: `src/locales/en/organisation.json`,
78	+	`src/locales/en/settings.json`, `src/components/ui/data-table.tsx`,
79	+	`src/components/ui/stat-card.tsx`, `src/app/organisation/page.tsx`,
80	+	`src/app/organisation/list/page.tsx`,
81	+	`src/components/ui/data-table.stories.tsx`, `e2e/home.spec.ts`
82	+	* Output:
83	+	```json
84	+	{"commits":[
85	+	{"type":"feat","scope":"i18n","files":["src/locales/en/organisation.json","src/locales/en/settings.json"]},
86	+	{"type":"feat","scope":"ui","files":["src/components/ui/data-table.tsx","src/components/ui/stat-card.tsx"]},
87	+	{"type":"feat","scope":"organisation","files":["src/app/organisation/page.tsx","src/app/organisation/list/page.tsx"]},
88	+	{"type":"docs","scope":"storybook","files":["src/components/ui/data-table.stories.tsx"]},
89	+	{"type":"test","scope":"e2e","files":["e2e/home.spec.ts"]}
90	+	]}
91	+	```

config.sh

			@@ -12,7 +12,9 @@ CONFIG_FILES=(
12	12		".zshrc"
13	13		".config/starship.toml"
14	14		".config/ai-commit-prompt.txt"
	15	+	".config/ai-commit-split-prompt.txt"
15	16		".config/opencode/agents/ai-commit.md"
	17	+	".config/opencode/agents/ai-commit-plan.md"
16	18		)
17	19
18	20		echo "Starting configuration download..."
			@@ -23,7 +25,9 @@ for f in "${CONFIG_FILES[@]}"; do
23	25		remote_name="${f#.}"
24	26		[[ "$f" == ".config/starship.toml" ]] && remote_name="starship.toml"
25	27		[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_name="ai-commit-prompt.txt"
	28	+	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_name="ai-commit-split-prompt.txt"
26	29		[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_name="ai-commit.md"
	30	+	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_name="ai-commit-plan.md"
27	31		url="$GIST_RAW_BASE/$remote_name"
28	32		target="$HOME/$f"
29	33		tmp="${target}.tmp.$$"

func

			@@ -719,63 +719,390 @@ plan_build() {
719	719		}
720	720
721	721		# -----------------------------------------------------------------------------
722		-	# Function: aicommit (Automated Conventional Commit Engine Wrapper)
	722	+	# Internal: _aicommit_usage (Print aicommit usage)
723	723		# -----------------------------------------------------------------------------
724		-	aicommit() {
725		-	local diff engine prompt
726		-	engine=${1:-claude}
	724	+	_aicommit_usage() {
	725	+	printf "Usage: aicommit [--modules] [--yes] [claude \| copilot \| opencode]\n"
	726	+	printf " --modules Split staged changes into one commit per module\n"
	727	+	printf " --yes Skip the plan confirmation in --modules mode\n"
	728	+	}
	729	+
	730	+	# -----------------------------------------------------------------------------
	731	+	# Internal: _aicommit_staged_diff (Staged diff without lock/minified files)
	732	+	# -----------------------------------------------------------------------------
	733	+	_aicommit_staged_diff() {
	734	+	# Exclude lock files/minified files and cap at ~100k characters to prevent CLI crashes
	735	+	git diff --cached -- . ":(exclude).lock" ":(exclude)-lock.json" ":(exclude)*.min.js" \| head -c 100000
	736	+	}
	737	+
	738	+	# -----------------------------------------------------------------------------
	739	+	# Internal: _aicommit_engine (Ask an AI CLI to commit or to plan a split)
	740	+	# -----------------------------------------------------------------------------
	741	+	_aicommit_engine() {
	742	+	local engine="$1"
	743	+	local mode="$2"
	744	+	local input="$3"
	745	+	local name
	746	+
727	747		case "$engine" in
728		-	claude\|copilot\|opencode) ;;
729		-	*)
730		-	printf "❌ Error: Invalid engine '%s'\n" "$engine" >&2
731		-	printf "Usage: aicommit [claude \| copilot \| opencode]\n" >&2
732		-	return 1
	748	+	claude) name="Claude" ;;
	749	+	copilot) name="Copilot" ;;
	750	+	opencode) name="OpenCode" ;;
	751	+	esac
	752	+
	753	+	# Status goes to stderr so plan output on stdout stays clean JSON.
	754	+	if [ "$mode" = "plan" ]; then
	755	+	printf "🧩 %s is planning per-module commits...\n" "$name" >&2
	756	+	else
	757	+	printf "🤖 %s is analyzing staged changes...\n" "$name" >&2
	758	+	fi
	759	+
	760	+	case "$engine:$mode" in
	761	+	claude:commit)
	762	+	printf "%s\n" "$input" \
	763	+	\| command claude --allowedTools 'Bash(git commit *)' --permission-mode dontAsk -p \
	764	+	"Read the provided instructions and diff, then generate and execute the commit."
	765	+	;;
	766	+	claude:plan)
	767	+	printf "%s\n" "$input" \
	768	+	\| command claude --permission-mode dontAsk -p \
	769	+	"Read the provided instructions and staged changes, then reply with only the JSON plan."
	770	+	;;
	771	+	copilot:commit)
	772	+	copilot -p "$input" -s --no-ask-user --allow-tool='shell(git:*)'
	773	+	;;
	774	+	copilot:plan)
	775	+	copilot -p "$input" -s --no-ask-user
	776	+	;;
	777	+	opencode:commit)
	778	+	printf "%s\n" "$input" \| opencode run --agent ai-commit
	779	+	;;
	780	+	opencode:plan)
	781	+	printf "%s\n" "$input" \| opencode run --agent ai-commit-plan
733	782		;;
734	783		esac
735		-
736		-	# 1. Get diff safely: exclude lock files/minified files and cap at ~100k characters to prevent CLI crashes
737		-	diff=$(git diff --cached -- . ":(exclude).lock" ":(exclude)-lock.json" ":(exclude)*.min.js" \| head -c 100000)
738		-
739		-	if [ -z "$diff" ]; then
	784	+	}
	785	+
	786	+	# -----------------------------------------------------------------------------
	787	+	# Internal: _aicommit_restage (Stage HEAD plus plan groups first..last from a tree)
	788	+	# -----------------------------------------------------------------------------
	789	+	_aicommit_restage() {
	790	+	local tree="$1"
	791	+	local run_dir="$2"
	792	+	local first="$3"
	793	+	local last="$4"
	794	+	local number
	795	+
	796	+	if git rev-parse -q --verify HEAD >/dev/null; then
	797	+	git read-tree HEAD \|\| return 1
	798	+	else
	799	+	git read-tree --empty \|\| return 1
	800	+	fi
	801	+
	802	+	[ "$first" -le "$last" ] \|\| return 0
	803	+
	804	+	number="$first"
	805	+	while [ "$number" -le "$last" ]; do
	806	+	cat "$run_dir/$(printf "%03d" "$number").files"
	807	+	number=$((number + 1))
	808	+	done \| git --literal-pathspecs restore --staged --source="$tree" --pathspec-from-file=- --pathspec-file-nul
	809	+	}
	810	+
	811	+	# -----------------------------------------------------------------------------
	812	+	# Internal: _aicommit_plan (Validate the AI split plan into per-group files)
	813	+	# -----------------------------------------------------------------------------
	814	+	_aicommit_plan() {
	815	+	local run_dir="$1"
	816	+
	817	+	python3 -c '
	818	+	import json, os, re, sys
	819	+
	820	+	sys.stdout.reconfigure(errors="backslashreplace")
	821	+	sys.stderr.reconfigure(errors="backslashreplace")
	822	+	run_dir = sys.argv[1]
	823	+	types = {"feat", "fix", "docs", "style", "refactor", "perf", "test", "build", "ci", "chore"}
	824	+
	825	+	with open(os.path.join(run_dir, "staged"), "rb") as fh:
	826	+	staged = [p for p in fh.read().decode("utf-8", "surrogateescape").split("\0") if p]
	827	+	with open(os.path.join(run_dir, "plan.out"), encoding="utf-8", errors="replace") as fh:
	828	+	raw = re.sub(r"\x1b\[[0-?][ -/][@-~]", "", fh.read())
	829	+
	830	+	# Take the last {"commits": [...]} object in the reply, ignoring fences and prose.
	831	+	plan, decoder, pos = None, json.JSONDecoder(), raw.find("{")
	832	+	while pos != -1:
	833	+	try:
	834	+	obj, end = decoder.raw_decode(raw, pos)
	835	+	except ValueError:
	836	+	pos = raw.find("{", pos + 1)
	837	+	continue
	838	+	if isinstance(obj, dict) and isinstance(obj.get("commits"), list):
	839	+	plan = obj
	840	+	pos = raw.find("{", end)
	841	+	else:
	842	+	pos = raw.find("{", pos + 1)
	843	+
	844	+	if plan is None:
	845	+	sys.exit("❌ Error: The AI reply did not contain a JSON commit plan.")
	846	+
	847	+	# Every staged path must land in exactly one group; anything unassigned goes last.
	848	+	staged_set, seen, groups, warnings = set(staged), set(), [], []
	849	+	for commit in plan["commits"]:
	850	+	if not isinstance(commit, dict) or not isinstance(commit.get("files"), list):
	851	+	continue
	852	+	files = []
	853	+	for path in commit["files"]:
	854	+	if not isinstance(path, str):
	855	+	continue
	856	+	if path not in staged_set:
	857	+	warnings.append("ignoring path that is not staged: " + path)
	858	+	elif path in seen:
	859	+	warnings.append("ignoring duplicate path: " + path)
	860	+	else:
	861	+	seen.add(path)
	862	+	files.append(path)
	863	+	if not files:
	864	+	continue
	865	+	kind = str(commit.get("type", "")).strip().lower()
	866	+	scope = re.sub(r"[^a-z0-9._/-]", "", str(commit.get("scope", "")).lower())
	867	+	label = ""
	868	+	if kind in types:
	869	+	label = kind + ("(" + scope + ")" if scope else "")
	870	+	groups.append((label, files))
	871	+
	872	+	missing = [p for p in staged if p not in seen]
	873	+	if missing:
	874	+	warnings.append("%d staged path(s) were not planned; adding them as a final commit" % len(missing))
	875	+	groups.append(("", missing))
	876	+
	877	+	for number, (label, files) in enumerate(groups, 1):
	878	+	base = os.path.join(run_dir, "%03d" % number)
	879	+	with open(base + ".files", "wb") as fh:
	880	+	fh.write("".join(p + "\0" for p in files).encode("utf-8", "surrogateescape"))
	881	+	with open(base + ".label", "w") as fh:
	882	+	fh.write(label)
	883	+	with open(os.path.join(run_dir, "count"), "w") as fh:
	884	+	fh.write(str(len(groups)))
	885	+
	886	+	for warning in warnings:
	887	+	print("⚠️ " + warning, file=sys.stderr)
	888	+	print("📋 Planned commits:")
	889	+	for number, (label, files) in enumerate(groups, 1):
	890	+	print(" %d. %s (%d file%s)" % (number, label or "unplanned", len(files), "" if len(files) == 1 else "s"))
	891	+	for path in files:
	892	+	print(" " + path)
	893	+	' "$run_dir"
	894	+	}
	895	+
	896	+	# -----------------------------------------------------------------------------
	897	+	# Internal: _aicommit_modules_run (Plan, confirm, and commit each module group)
	898	+	# -----------------------------------------------------------------------------
	899	+	_aicommit_modules_run() {
	900	+	local engine="$1"
	901	+	local assume_yes="$2"
	902	+	local run_dir="$3"
	903	+	local prompt_file="$HOME/.config/ai-commit-prompt.txt"
	904	+	local split_prompt_file="$HOME/.config/ai-commit-split-prompt.txt"
	905	+	local tree
	906	+	local total
	907	+	local current
	908	+	local group
	909	+	local label
	910	+	local hint
	911	+	local diff
	912	+	local expected
	913	+	local head_before
	914	+	local head_after
	915	+	local unexpected
	916	+	local reply
	917	+
	918	+	if ! tree="$(git write-tree 2>/dev/null)"; then
	919	+	printf "❌ Error: Unable to snapshot the index (unresolved conflicts?).\n" >&2
	920	+	return 1
	921	+	fi
	922	+
	923	+	git diff --cached --name-only --no-renames -z > "$run_dir/staged" \|\| return 1
	924	+	if [ ! -s "$run_dir/staged" ]; then
740	925		printf "❌ Error: Nothing staged to commit.\n" >&2
741	926		return 1
742	927		fi
743	928
744		-	if [ ! -f "$HOME/.config/ai-commit-prompt.txt" ]; then
745		-	printf "❌ Error: Configuration file not found at ~/.config/ai-commit-prompt.txt\n" >&2
746		-	printf "Please create it and paste your system prompt inside.\n" >&2
	929	+	_aicommit_engine "$engine" plan "$(cat "$split_prompt_file")
	930	+
	931	+	Here are the staged files:
	932	+	$(git -c core.quotePath=false diff --cached --name-status -M)
	933	+
	934	+	Here is the diffstat:
	935	+	$(git -c core.quotePath=false diff --cached --numstat -M)
	936	+
	937	+	Here is the git diff:
	938	+	$(_aicommit_staged_diff)" > "$run_dir/plan.out"
	939	+
	940	+	if ! _aicommit_plan "$run_dir"; then
	941	+	printf "Last lines of the AI reply:\n" >&2
	942	+	tail -n 20 "$run_dir/plan.out" >&2
747	943		return 1
748	944		fi
	945	+	total="$(cat "$run_dir/count")"
749	946
750		-	prompt=$(cat "$HOME/.config/ai-commit-prompt.txt")
	947	+	if [ "$assume_yes" -ne 1 ]; then
	948	+	if ! (: </dev/tty) 2>/dev/null; then
	949	+	printf "❌ Error: No interactive terminal to confirm the plan; rerun with --yes.\n" >&2
	950	+	return 1
	951	+	fi
	952	+	printf "Create these %s commit(s)? (Y/n) " "$total" >/dev/tty
	953	+	IFS= read -r reply </dev/tty \|\| reply="n"
	954	+	case "$reply" in
	955	+	""\|y\|Y\|yes\|YES\|Yes) ;;
	956	+	*)
	957	+	printf "Aborted. Staged changes are untouched.\n"
	958	+	return 1
	959	+	;;
	960	+	esac
	961	+	fi
751	962
752		-	case "$engine" in
753		-	claude)
754		-	echo "🤖 Claude is analyzing staged changes..."
755		-	cat "$HOME/.config/ai-commit-prompt.txt" <(echo -e "\n\nHere is the git diff:\n$diff") \
756		-	\| command claude --allowedTools 'Bash(git commit *)' --permission-mode dontAsk -p \
757		-	"Read the provided instructions and diff, then generate and execute the commit."
758		-	;;
	963	+	printf "💾 Staged snapshot: %s (recover with: git read-tree %s)\n" "$tree" "$tree"
	964	+	current=1
	965	+	trap '_aicommit_restage "$tree" "$run_dir" "$current" "$total"; printf "\n⚠️ Interrupted. Uncommitted groups are staged again.\n" >&2; rm -rf "$run_dir"; exit 130' INT TERM
	966	+
	967	+	while [ "$current" -le "$total" ]; do
	968	+	group="$run_dir/$(printf "%03d" "$current").files"
	969	+	label="$(cat "$run_dir/$(printf "%03d" "$current").label")"
	970	+
	971	+	if ! _aicommit_restage "$tree" "$run_dir" "$current" "$current"; then
	972	+	printf "❌ Error: Unable to stage commit %s/%s.\n" "$current" "$total" >&2
	973	+	_aicommit_restage "$tree" "$run_dir" "$current" "$total"
	974	+	return 1
	975	+	fi
	976	+
	977	+	expected="$(git write-tree)"
	978	+	head_before="$(git rev-parse -q --verify HEAD)"
	979	+	diff="$(_aicommit_staged_diff)"
	980	+	[ -n "$diff" ] \|\| diff="$(git diff --cached --stat)"
	981	+
	982	+	hint="This is commit $current of $total, split by module."
	983	+	if [ -n "$label" ]; then
	984	+	hint="$hint The planned type and scope is $label; use it unless the diff clearly calls for another."
	985	+	fi
759	986
760		-	copilot)
761		-	echo "🤖 Copilot is analyzing staged changes..."
762		-	copilot -p "$prompt
	987	+	printf "\n[%s/%s] %s\n" "$current" "$total" "${label:-unplanned}"
	988	+	_aicommit_engine "$engine" commit "$(cat "$prompt_file")
	989	+
	990	+	$hint
763	991
764	992		Here is the git diff:
765		-	$diff" -s --no-ask-user --allow-tool='shell(git:*)'
766		-	;;
	993	+	$diff"
767	994
768		-	opencode)
769		-	echo "🤖 OpenCode is analyzing staged changes..."
770		-	cat "$HOME/.config/ai-commit-prompt.txt" <(echo -e "\n\nHere is the git diff:\n$diff") \| opencode run --agent ai-commit
771		-	;;
	995	+	head_after="$(git rev-parse -q --verify HEAD)"
	996	+	if [ -z "$head_after" ] \|\| [ "$head_after" = "$head_before" ]; then
	997	+	printf "❌ Error: No commit was created for group %s/%s.\n" "$current" "$total" >&2
	998	+	_aicommit_restage "$tree" "$run_dir" "$current" "$total"
	999	+	printf "Uncommitted groups are staged again.\n" >&2
	1000	+	return 1
	1001	+	fi
772	1002
773		-	*)
774		-	printf "❌ Error: Invalid engine '%s'\n" "$engine" >&2
775		-	printf "Usage: aicommit [claude \| copilot \| opencode]\n" >&2
	1003	+	# Hooks may reformat this group's files, but nothing outside it may sneak in.
	1004	+	unexpected="$(LC_ALL=C comm -13 \
	1005	+	<(tr '\0' '\n' < "$group" \| LC_ALL=C sort) \
	1006	+	<(git diff --name-only --no-renames -z "$expected" HEAD \| tr '\0' '\n' \| LC_ALL=C sort))"
	1007	+	if [ -n "$unexpected" ]; then
	1008	+	printf "❌ Error: Commit %s/%s included files outside its group:\n%s\n" "$current" "$total" "$unexpected" >&2
	1009	+	_aicommit_restage "$tree" "$run_dir" "$((current + 1))" "$total"
	1010	+	printf "Inspect it with 'git show'; undo it with 'git reset --soft HEAD~1'.\n" >&2
776	1011		return 1
777		-	;;
778		-	esac
	1012	+	fi
	1013	+
	1014	+	current=$((current + 1))
	1015	+	done
	1016	+
	1017	+	trap - INT TERM
	1018	+	printf "\n✅ Created %s commit(s):\n" "$total"
	1019	+	git --no-pager log --oneline -n "$total"
	1020	+	}
	1021	+
	1022	+	# -----------------------------------------------------------------------------
	1023	+	# Internal: _aicommit_modules (Split staged changes into per-module commits)
	1024	+	# -----------------------------------------------------------------------------
	1025	+	_aicommit_modules() {
	1026	+	local engine="$1"
	1027	+	local assume_yes="$2"
	1028	+	local top
	1029	+	local run_dir
	1030	+	local rc
	1031	+
	1032	+	if [ ! -f "$HOME/.config/ai-commit-split-prompt.txt" ]; then
	1033	+	printf "❌ Error: Configuration file not found at ~/.config/ai-commit-split-prompt.txt\n" >&2
	1034	+	return 1
	1035	+	fi
	1036	+
	1037	+	require_cli python3 "Python 3" \|\| return 1
	1038	+
	1039	+	if ! top="$(git rev-parse --show-toplevel 2>/dev/null)"; then
	1040	+	printf "❌ Error: Not inside a git work tree.\n" >&2
	1041	+	return 1
	1042	+	fi
	1043	+
	1044	+	run_dir="$(mktemp -d "${TMPDIR:-/tmp}/aicommit.XXXXXX")" \|\| return 1
	1045	+
	1046	+	# Subshell: run from the repo root and keep the traps away from the caller.
	1047	+	(
	1048	+	trap 'rm -rf "$run_dir"; exit 130' INT TERM
	1049	+	cd "$top" \|\| exit 1
	1050	+	_aicommit_modules_run "$engine" "$assume_yes" "$run_dir"
	1051	+	)
	1052	+	rc=$?
	1053	+	rm -rf "$run_dir"
	1054	+	return "$rc"
	1055	+	}
	1056	+
	1057	+	# -----------------------------------------------------------------------------
	1058	+	# Function: aicommit (Automated Conventional Commit Engine Wrapper)
	1059	+	# -----------------------------------------------------------------------------
	1060	+	aicommit() {
	1061	+	local engine="claude"
	1062	+	local modules=0
	1063	+	local assume_yes=0
	1064	+	local arg
	1065	+	local diff
	1066	+	local prompt_file="$HOME/.config/ai-commit-prompt.txt"
	1067	+
	1068	+	for arg in "$@"; do
	1069	+	case "$arg" in
	1070	+	claude\|copilot\|opencode) engine="$arg" ;;
	1071	+	--modules) modules=1 ;;
	1072	+	-y\|--yes) assume_yes=1 ;;
	1073	+	-h\|--help)
	1074	+	_aicommit_usage
	1075	+	return 0
	1076	+	;;
	1077	+	*)
	1078	+	printf "❌ Error: Invalid argument '%s'\n" "$arg" >&2
	1079	+	_aicommit_usage >&2
	1080	+	return 1
	1081	+	;;
	1082	+	esac
	1083	+	done
	1084	+
	1085	+	if [ ! -f "$prompt_file" ]; then
	1086	+	printf "❌ Error: Configuration file not found at ~/.config/ai-commit-prompt.txt\n" >&2
	1087	+	printf "Please create it and paste your system prompt inside.\n" >&2
	1088	+	return 1
	1089	+	fi
	1090	+
	1091	+	if [ "$modules" -eq 1 ]; then
	1092	+	_aicommit_modules "$engine" "$assume_yes"
	1093	+	return
	1094	+	fi
	1095	+
	1096	+	diff="$(_aicommit_staged_diff)"
	1097	+	if [ -z "$diff" ]; then
	1098	+	printf "❌ Error: Nothing staged to commit.\n" >&2
	1099	+	return 1
	1100	+	fi
	1101	+
	1102	+	_aicommit_engine "$engine" commit "$(cat "$prompt_file")
	1103	+
	1104	+	Here is the git diff:
	1105	+	$diff"
779	1106		}
780	1107
781	1108		# -----------------------------------------------------------------------------

zsh_macos.sh

			@@ -29,7 +29,9 @@ CONFIG_FILES=(
29	29		".zshrc"
30	30		".config/starship.toml"
31	31		".config/ai-commit-prompt.txt"
	32	+	".config/ai-commit-split-prompt.txt"
32	33		".config/opencode/agents/ai-commit.md"
	34	+	".config/opencode/agents/ai-commit-plan.md"
33	35		)
34	36
35	37		# =============================
			@@ -92,7 +94,9 @@ download_configs() {
92	94		local remote_file="${f#.}"
93	95		[[ "$f" == ".config/starship.toml" ]] && remote_file="starship.toml"
94	96		[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_file="ai-commit-prompt.txt"
	97	+	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_file="ai-commit-split-prompt.txt"
95	98		[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_file="ai-commit.md"
	99	+	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_file="ai-commit-plan.md"
96	100		local url="$GIST_RAW_BASE/$remote_file"
97	101		local target="$HOME/$f"
98	102		local tmp="${target}.tmp.$$"

zsh_ubuntu.sh

			@@ -32,7 +32,9 @@ CONFIG_FILES=(
32	32		".zshrc"
33	33		".config/starship.toml"
34	34		".config/ai-commit-prompt.txt"
	35	+	".config/ai-commit-split-prompt.txt"
35	36		".config/opencode/agents/ai-commit.md"
	37	+	".config/opencode/agents/ai-commit-plan.md"
36	38		)
37	39
38	40		# =============================
			@@ -183,7 +185,9 @@ download_configs() {
183	185		local remote_file="${f#.}"
184	186		[[ "$f" == ".config/starship.toml" ]] && remote_file="starship.toml"
185	187		[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_file="ai-commit-prompt.txt"
	188	+	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_file="ai-commit-split-prompt.txt"
186	189		[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_file="ai-commit.md"
	190	+	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_file="ai-commit-plan.md"
187	191		local url="$GIST_RAW_BASE/$remote_file"
188	192		local target="$HOME/$f"
189	193		local tmp="${target}.tmp.$$"

zsh_wsl.sh

			@@ -32,7 +32,9 @@ CONFIG_FILES=(
32	32		".zshrc"
33	33		".config/starship.toml"
34	34		".config/ai-commit-prompt.txt"
	35	+	".config/ai-commit-split-prompt.txt"
35	36		".config/opencode/agents/ai-commit.md"
	37	+	".config/opencode/agents/ai-commit-plan.md"
36	38		)
37	39
38	40		# =============================
			@@ -185,7 +187,9 @@ download_configs() {
185	187		local remote_file="${f#.}"
186	188		[[ "$f" == ".config/starship.toml" ]] && remote_file="starship.toml"
187	189		[[ "$f" == ".config/ai-commit-prompt.txt" ]] && remote_file="ai-commit-prompt.txt"
	190	+	[[ "$f" == ".config/ai-commit-split-prompt.txt" ]] && remote_file="ai-commit-split-prompt.txt"
188	191		[[ "$f" == ".config/opencode/agents/ai-commit.md" ]] && remote_file="ai-commit.md"
	192	+	[[ "$f" == ".config/opencode/agents/ai-commit-plan.md" ]] && remote_file="ai-commit-plan.md"
189	193		local url="$GIST_RAW_BASE/$remote_file"
190	194		local target="$HOME/$f"
191	195		local tmp="${target}.tmp.$$"

Vernon Wee Hong KOH revisó este gist 2 weeks ago. Ir a la revisión

1 file changed, 10 insertions, 10 deletions

func

			@@ -102,18 +102,18 @@ open_file() {
102	102		alias open='open_file'
103	103
104	104		# -----------------------------------------------------------------------------
105		-	# Function: clear_history (Supports shell, Claude, Codex, and OpenCode)
	105	+	# Function: ch (Supports shell, Claude, Codex, and OpenCode)
106	106		# -----------------------------------------------------------------------------
107		-	clear_history() {
	107	+	ch() {
108	108		if [ "$#" -gt 1 ]; then
109		-	printf "Usage: clear_history [--all \| shell \| claude \| codex \| opencode]\n" >&2
	109	+	printf "Usage: ch [--all \| shell \| claude \| codex \| opencode]\n" >&2
110	110		return 2
111	111		fi
112	112		case "${1:-}" in
113	113		--all)
114	114		local result=0 target
115	115		for target in claude codex opencode shell; do
116		-	clear_history "$target" \|\| result=1
	116	+	ch "$target" \|\| result=1
117	117		done
118	118
119	119		if [ -t 1 ]; then
			@@ -172,7 +172,7 @@ clear_history() {
172	172		echo "Shell history cleared."
173	173		;;
174	174		*)
175		-	printf "Usage: clear_history [--all \| shell \| claude \| codex \| opencode]\n" >&2
	175	+	printf "Usage: ch [--all \| shell \| claude \| codex \| opencode]\n" >&2
176	176		return 2
177	177		;;
178	178		esac
			@@ -207,7 +207,7 @@ require_cli() {
207	207		claude() {
208	208		# Shortcut for clearing cache
209	209		if [[ "$1" == "clear" ]]; then
210		-	clear_history claude
	210	+	ch claude
211	211		return $?
212	212		fi
213	213
			@@ -813,9 +813,9 @@ create() {
813	813		}
814	814
815	815		# -----------------------------------------------------------------------------
816		-	# Function: kill_port (Kill or check the process using a port)
	816	+	# Function: ckp (Kill or check the process using a port)
817	817		# -----------------------------------------------------------------------------
818		-	kill_port() {
	818	+	ckp() {
819	819		local action="kill"
820	820		local signal="TERM"
821	821		local port
			@@ -837,7 +837,7 @@ kill_port() {
837	837		shift
838	838		;;
839	839		-h\|--help\|"")
840		-	printf "Usage: kill_port [--check\|-c\|--kill\|-k\|--force\|-f] <port_number>\n" >&2
	840	+	printf "Usage: ckp [--check\|-c\|--kill\|-k\|--force\|-f] <port_number>\n" >&2
841	841		return 1
842	842		;;
843	843		esac
			@@ -845,7 +845,7 @@ kill_port() {
845	845		port="${1:-}"
846	846		if [[ ! "$port" =~ ^[0-9]+$ ]] \|\| [ "$port" -lt 1 ] \|\| [ "$port" -gt 65535 ]; then
847	847		printf "Error: port must be a number between 1 and 65535.\n" >&2
848		-	printf "Usage: kill_port [--check\|-c\|--kill\|-k\|--force\|-f] <port_number>\n" >&2
	848	+	printf "Usage: ckp [--check\|-c\|--kill\|-k\|--force\|-f] <port_number>\n" >&2
849	849		return 1
850	850		fi
851	851

Vernon Wee Hong KOH revisó este gist 3 weeks ago. Ir a la revisión

1 file changed, 9 insertions

alias

			@@ -31,6 +31,15 @@ alias gstu='git stash push --keep-index --include-untracked'
31	31		alias gsta='git stash push --include-untracked'
32	32		alias grmrf='git checkout -- . && git clean -fd'
33	33
	34	+	# Create a feature worktree from origin/integration: gwa pill
	35	+	gwa() {
	36	+	if [ "$#" -ne 1 ] \|\| [ -z "$1" ]; then
	37	+	printf 'Usage: gwa <feature-name>\n' >&2
	38	+	return 1
	39	+	fi
	40	+	git worktree add "../worktree/$1" -b "feature/$1" origin/integration
	41	+	}
	42	+
34	43		# List loaded aliases, optionally filtered by a case-insensitive keyword.
35	44		ah() {
36	45		if [ "$#" -eq 0 ]; then

Siguiente Anterior